The Antminer D3 is the latest product by Bitmain, released in 2017. It focuses on X11 mining, an algorithm used by the popular Dash cryptocurrency. With a 15 GH/s hashing power, it consumes 1200w and is currently valued at $1599 although it is currently not available.
Specifications of the Antminer D3 are as follows:
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.
To confirm your order, remember to click on "Pay for Order" after you have submitted your order. You can then select you preferred method of payment
We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs.
All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.
Disclosure: Mining equipment metrics are calculated based on a network hash rate of 278,232 GH/s and using a DASH - USD exchange rate of 1 DASH = $ 290.4. These figures vary based on the total network hash rate and on the DASH to USD conversion rate. Equipment cost can vary, block reward is fixed at 3.6029519103467464 DASH and future block reward reductions are not taken into account. The electricity price used in generating these metrics is $ 0.12 per kWh.
Read More
Specifications of the Antminer D3 are as follows:
- Hash rate: 15 GH/s (Variation of ±5% is expected)
- Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp).
- Dimensions of the miner: 320*130*190mm
- Hashing algorithm: X11
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.
To confirm your order, remember to click on "Pay for Order" after you have submitted your order. You can then select you preferred method of payment
We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs.
All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.
Disclosure: Mining equipment metrics are calculated based on a network hash rate of 278,232 GH/s and using a DASH - USD exchange rate of 1 DASH = $ 290.4. These figures vary based on the total network hash rate and on the DASH to USD conversion rate. Equipment cost can vary, block reward is fixed at 3.6029519103467464 DASH and future block reward reductions are not taken into account. The electricity price used in generating these metrics is $ 0.12 per kWh.
Read More
No comments:
Post a Comment